No products in the cart.Start Shopping
33 pounds each stand. The holes are 1” holes.
Not for this unit. Just the J-Hooks. We are working on a new design that will include spotter arms to come in 2021
ARCHON does not guarantee and do not offer support for 3rd party products; however, we have had many customers retrofit the unit for their needs. You must be sure you are ordering the cable crossover with the power cage attachment, but from there it is up to you.
Great question! Our pulley stations are very close to 1.1:1. So it takes close to 1.1 pounds of force to pull 1 pound on the carriage or 11 pounds of force to pull 10 pounds on the carriage. Now, important to understand, this depends on the tension of the cords as well as if you are using one handle or two. One handle lifting the weight feels lighter as the carriage is moving a shorter distance vertically, but two handles lift the carriage higher, so the weight feels heavier.
No, the two-inch adapters are included. The unit comes ready to accept 1” or 2” plates.
Great question. You get both, Left and Right Towers.
Awesome question! The answer is “NO!” A very specific engineering design on our unit that differentiates us from competitors is that no attachment interferes with the use of the cage, including plate storage. You just want to make sure that you have the pulley out of the way from where you are racking the bar. So either raise to the top or lower to the bottom.
Thank you for your questions. It is 81″ even with the top of the page.
Not with our ARCHON rack. We engineered this to be much more stable by including 6 uprights rather than 4 that the cheaper competitor units offer. That in itself adds a lot of stability….in addition you likely will have plates stored on the rear uprights, “They do not interfere with using the interior cage (unique feature)….that increases the stability. No floor anchoring needed.
They are 1” Holes.
They are. There are 27 Adjustable positions for both the safety catches and safety bar.
Great question. Our actual carriage uses commercial steel bearings, as with all of our cable stations, much like you would hear in a leg press machine. That is what differentiates us from competitors is whereas they use cheaper plastic bushings and hollow rods that deteriorate over time, all of our cable attachments and wall units use only commercial bearings. The carriage in turn is capable of 250LBS of a smooth lift. Even our rods are solid steel. You will also notice that we use 6 uprights. That third set or rear uprights if you have plates stored, even bumpers, you can still use the interior rack without any interference.
End to End the width is 122.625″ The overall depth when attached to the cage and unit is 60.75″ The Height is 81.25″ Please do not hesitate if you have any further questions.
Yes, if you click here, you will see the ARCHON Dip Attachment.
Hello, the overall height of the unit is 23.5″ and the overall depth of the unit is 35″. Keep in mind, this is the unit. How high you mount it is your discretion.
It does come with mounting screws. We do recommend Tapcon if going into concrete. You can pick those up at LOWE’s or HOME DEPOT.
The distance from the center of the left bracket mounting holes to the center of the rack bracket mounting holes is 43.375″.
Hello, the diameter of the pull-up bar is 30mm.