No products in the cart.Start Shopping
ARCHON Wall Mount Cable Crossover
The ARCHON Wall Mount Cable Cross Over is the ultimate cable station attachment for those looking to bring the commercial gym home. With a carriage system constructed with steel ball bearings that travel up solid steel rods, unlike competitors with plastic bushings and hollow rods that deteriorate and stick over time, our unit is built to last and built for work.
Capable of carrying a whopping 250 LBS smoothly per carriage, you can use Standard 1” plates or 2”
Olympic or Bumper Plates. 19 adjustable positions per side allow you or your clients to perform all your
favorite workouts at home or the ability to train multiple clients at once in your commercial studio.
Mount to concrete or wood studs (Hardware Included)
The cable station comes out 35” from the wall. This is from the wall to the furthest point, which is the plate storage rack. The width of course is your choice.
ARCHON does not guarantee and do not offer support for 3rd party products; however, we have had many customers retrofit the unit for their needs. You must be sure you are ordering the cable crossover with the power cage attachment, but from there it is up to you.
No, the two-inch adapters are included. The unit comes ready to accept 1” or 2” plates.
Great question. You get both, Left and Right Towers.
Great question! Our pulley stations are very close to 1.1:1. So it takes close to 1.1 pounds of force to pull 1 pound on the carriage or 11 pounds of force to pull 10 pounds on the carriage. Now, important to understand, this depends on the tension of the cords as well as if you are using one handle or two. One handle lifting the weight feels lighter as the carriage is moving a shorter distance vertically, but two handles lift the carriage higher, so the weight feels heavier.
No, you cannot. Cable stations must be mounted to either concreate, wood studs, or similar options.
Not on its own. The top backet must be mounted. If you have a base board that interferes that you do not want to notch out, you can mount the unit to the floor and place an appropriate shimmy (The gap between the top mounting and your wall to fill) between the top bracket and the wall for mounting. Additional hardware may be required. We recommend, if going into a concreate floor or wall purchasing Tapcon Concrete Screws from Lowes or Home Depot.
Welcome to the website of ARCHON Fitness LLC (ARCHON). Provided are the notices, terms, and conditions set forth in this agreement between you (The Buyer) and ARCHON Fitness LLC (Seller). You, (The Buyer), are subject to the rules, guidelines, terms, and conditions of this agreement having been informed and accepted these terms.
Use only genuine archon replacement parts. Failure to do so will void warranty and could result in personal injury or even death. There is a risk assumed by individuals who use this type of equipment. To minimize the risk, always follow these simple rules. 1.read and understand all enclosed instructions before using this equipment. 2.inspect equipment before each use. Replace all parts at the first signs of wear or damage. If in doubt about a specific part, do not use the equipment. Contact archon to speak with a product engineer. Failure to do so may result in injury. 3.follow routine maintenance. Refer to product manual or contact archon to speak with a product engineer. 4.consult your physician before starting any exercise program. Warm up properly before engaging in weight resistance training. 5.keep clear of all moving parts to prevent the risk of serious injury. 6.keep children from using equipment without direct adult supervision. Children should be kept at a safe distance when equipment is in use to prevent the injury. 7. To prevent possible tipping. It is recommended that your secure equipment to the floor to prevent possible tipping. Failure to do so you use equipment at your own risk.
Maintenance is not considered a warranty issue. Warranty is not transferable and original purchase receipt must be provided. Warranty claims are reviewed case by case by the ARCHON engineering department. The determination by the engineer is final.
1 Years: Cable covers.
2 Years: Pulley Bearings – Must be taken care of under proper maintenance.
2 Years: Hardware – Bolts, Nuts, Washers.
5 Years: Structural Damage Under Proper Use.